Anyone here crochet?
Posted: Mon May 09, 2005 11:20 am
Was wondering if anyone here crochets and if they have any good links for free patterns? 
STORM2K
Welcome to Storm2k! Your Year Round Weather Community since 2002!
http://www.storm2k.org/phpbb2/
Anyone here crochet?
Page 1 of 2
Posted: Mon May 09, 2005 11:24 am
Yep!!! What type of patterns are you looking for?
Posted: Mon May 09, 2005 11:29 am
I thought this said "is anyone crotchety?"
Posted: Mon May 09, 2005 3:55 pm
StormChasr wrote:I thought this said "is anyone crotchety?"
Oh yeah!! Just ask Dave.
Posted: Tue May 10, 2005 10:08 am
Looking for granny squares or kitchen stuff. Anything easy to make that sells-funds here are in the cellar and trying to raise the level to the first floor at least 
thanks sunny!
thanks sunny!
Posted: Tue May 10, 2005 10:13 am
angelwing wrote:Looking for granny squares or kitchen stuff. Anything easy to make that sells-funds here are in the cellar and trying to raise the level to the first floor at least
thanks sunny!
I'll see what I can find!
Posted: Tue May 17, 2005 2:24 pm
Posted: Tue May 17, 2005 2:39 pm
Thank you!
Posted: Tue May 17, 2005 2:42 pm
I know, I'm bad. I forgot. Forgive me?
Posted: Fri May 20, 2005 9:47 am
Sure I forgive you
Might not have time now anyway, I'm starting another full-time job, so working 2 full-time jobs. Gotta make money somehow
Might not have time now anyway, I'm starting another full-time job, so working 2 full-time jobs. Gotta make money somehow
Posted: Wed Jul 06, 2005 10:27 pm
I can't crochet--but I've been looking for something at craft fairs, etc.--if someone does make them, please PM me with price...
They were little "bags" that would hold a bar of soap (rounded corner soap like Dove, etc.) or "soap chips." There was a draw string to close the opening and tie it in a bow. But then it had a "head" and feet" and a little tail crocheted on so that it looked like a turtle! It was made of cotton crochet yarn (mine was green)... It probably came from a church fair sometime in the late 1940s... Carted it around for many, many years but it got lost in our last move. Very sad.
I'm looking for a replacement... But I also think these would "sell" at a craft fair. The nice thing is that little kids don't lose the soap in the water because the crocheting takes the "slippery" away... I loved my turtle... (managed to hang on to it for 50+ years--and perhaps it will turn up somewhere in a box--but I'd still like to buy a few for my grandchildren...)
They were little "bags" that would hold a bar of soap (rounded corner soap like Dove, etc.) or "soap chips." There was a draw string to close the opening and tie it in a bow. But then it had a "head" and feet" and a little tail crocheted on so that it looked like a turtle! It was made of cotton crochet yarn (mine was green)... It probably came from a church fair sometime in the late 1940s... Carted it around for many, many years but it got lost in our last move. Very sad.
I'm looking for a replacement... But I also think these would "sell" at a craft fair. The nice thing is that little kids don't lose the soap in the water because the crocheting takes the "slippery" away... I loved my turtle... (managed to hang on to it for 50+ years--and perhaps it will turn up somewhere in a box--but I'd still like to buy a few for my grandchildren...)
Posted: Thu Jul 07, 2005 3:04 am
Persepone wrote:I can't crochet--but I've been looking for something at craft fairs, etc.--if someone does make them, please PM me with price...
They were little "bags" that would hold a bar of soap (rounded corner soap like Dove, etc.) or "soap chips." There was a draw string to close the opening and tie it in a bow. But then it had a "head" and feet" and a little tail crocheted on so that it looked like a turtle! It was made of cotton crochet yarn (mine was green)... It probably came from a church fair sometime in the late 1940s... Carted it around for many, many years but it got lost in our last move. Very sad.
I'm looking for a replacement... But I also think these would "sell" at a craft fair. The nice thing is that little kids don't lose the soap in the water because the crocheting takes the "slippery" away... I loved my turtle... (managed to hang on to it for 50+ years--and perhaps it will turn up somewhere in a box--but I'd still like to buy a few for my grandchildren...)
I remember those bags...and Debi is very accomplished in knitting/crochet/embroidery. I'll have to ask her about them.
Posted: Wed Jul 13, 2005 1:12 pm
SOAPY, the Washcloth Turtle
MATERIALS:
Cotton #10 Thread--1 Ball each white or green for Main Color (MC) and 1 ball contrasting color (CC)(Note: Use a softer thread like Coats Knit-Cro-Sheen or DMC size #5 pearl cotton) I used white Knit-Cro-Sheen for the contrasting color border
Steel Crochet Hook Size 8
GAUGE: 4 spaces = 1.5" NOTE: Change size of hook if necessary to keep this gauge.
DIRECTIONS:
The entire BODY part is crocheted using FPdc and FPtr (insert hook from right to left under the dc or tr in the row below)
BODY: Ch 5, slip stitch in first ch to join. (note: this will be the area the tail is attached to after the body is finished.)
1st round: Ch 3, work 15 dc in ring, join with sl st in 3rd ch of ch 3 (16 sts, counting ch3)
2nd round: Ch 4, FPdc around 1st dc, *ch 1, 1 FPdc around next dc, repeat from * around; join with sl st in 3rd ch of starting Ch 4
3rd round: sc around post of dc below, then ch 6, 1 FPtr around next dc, *ch 2, 1 FPtr around next dc, repeat from * to end of round; join with sl st in 4th ch of starting Ch 6.
4th thru 14th rounds: sc around post of tr below, then ch 7, 1 FPtr around next tr, *ch 3, 1 FPtr around next tr, repeat from * to end of round; join with sl st in 4th ch of starting Ch 7. Fasten off.
***NOTE: Now you will have a long U-shaped body. The tail will be attached to the starting Ch 5 place, and the head will eventually stick out of the upper part, which will be gathered with a ribbon around the neck. Also, this body will be stuffed with foam rubber in an oval shape (I did this), or you could use an oval piece of soap to stick in there.
LEGS (Make 4):
1st row: Fold body together lengthwise (in otherwords hold piece flat together). Have flat edge on top. Looking at right side of piece, count down 6 loops from top right side. Attach thread with sl st, ch 5, 1 tr in same space, *ch 1, 1 tr in same space, repeat from * once. (4 tr and 3 spaces)
2nd row: Ch 5, turn, 1 tr in first space, ch 1, 1 tr in next space, ch 1, 1 tr in next space, ch 1, 1 tr in 4th ch of turning ch.
3rd row: Ch 6, turn, 1 tr in first space, * ch 2, 1 tr in next space, repeat from * 2 times more (4 spaces), ch 2, 1 tr in 4th ch of turning ch. Fasten off.
NOW, count down, skipping next 4 loops and attach thread with sl st in next loop. (2nd leg on side). Work legs on other side of turtle body to correspond with first side. (What I do here is leave one more row on top of turtle so that his "shell" will be higher on top - in other words, do the first two legs, then count "across" the body, skipping 9 squares. On the bottom there will be 7 squares showing across.)
TAIL
1ST row: Join with sl st between two dc's in beginning Ch 5 ring of body. Ch 6, 1 tr between the next two dc's , ch 2, 1 tr between the next two dc's. (In other words, you will be making three tr's in ring, between the dc's already there, in order to join the tail to this spot. Find the center four dc's IIII and start between the two on the right-hand side. Make sense?)
2nd row: Ch 7, turn, 1 tr in first space, 1 tr in next space, ch 3, 1 tr in 4th ch of turning ch. Ch 9, turn, join with sl st to 4th ch of turning ch. (there will be a long loop across tip of tail (skipping over the two tr‚s). Fasten off.
HEAD
Ch 4, join with sl st to form a ring.
1st round: Ch 1, work 8 sc in ring. Join with sl st to 1st sc.
2nd round: Ch 1, 2 sc in each st of round. Join with sl st to 1st sc.
3rd thru 10th round: Ch 1, 1 sc in each st of round, Join with sl st to 1st sc.
Stuff with foam rubber.
Fold head together to close opening. Work 1 sc in each of 8 stitches (through both thicknesses), turn, and do not fasten off. Join with body of turtle:
NOW: open body of turtle and count down 3 rows inside from flat top edge (edge being the first row). Find the two center loops (we‚re still on the inside of the body). There are 8 stitches on the turtle head edge We're going to attach 4 stitches to one loop and 4 stitches to the other loop.
Work 1 sc in each of 4 sts of head and around one of the above loops simultaneously. Then again the other 4 sts of head and around the next loop. Ch 1, turn , skip 1st st, 1 sc in each of the next two sts. Join with sl st in last stitch.Fasten Off.
NOW - With Contrasting Color (I used white):
Join with sl st in corner of body top (flat top edge). Ch 1, work 4 sc in each space of top round, and down along sides (on same round as legs are attached), and up leg (Note: in outer corner of leg, make 5 sc, ch 4, 1 sc, 4 sc in next loop, sc, ch 4, sc in center loop, 4 sc in next loop, and 1 sc, ch 4, 5 sc in next outer corner of leg. Continue with 4 sc in each space around ˆ except for tail, which will be 12 sc in large end loop of tail. Continue around, Fasten off.
Use buttons or embroider eyes and mouth on head (optional - looks cute even without this).
STUFF BODY: I used a piece of foam rubber (about 1-1/2" to 2" thick), cut into an oval shape, for the stuffing. You may also stuff the body with an oval piece of soap.
NOW: Thread 1/4" thick ribbon through the second round of loops down from flat edge of body ˆthis will be around the head, which is now sticking out of the center of the gathering. Tie a bow on top of neck.
MATERIALS:
Cotton #10 Thread--1 Ball each white or green for Main Color (MC) and 1 ball contrasting color (CC)(Note: Use a softer thread like Coats Knit-Cro-Sheen or DMC size #5 pearl cotton) I used white Knit-Cro-Sheen for the contrasting color border
Steel Crochet Hook Size 8
GAUGE: 4 spaces = 1.5" NOTE: Change size of hook if necessary to keep this gauge.
DIRECTIONS:
The entire BODY part is crocheted using FPdc and FPtr (insert hook from right to left under the dc or tr in the row below)
BODY: Ch 5, slip stitch in first ch to join. (note: this will be the area the tail is attached to after the body is finished.)
1st round: Ch 3, work 15 dc in ring, join with sl st in 3rd ch of ch 3 (16 sts, counting ch3)
2nd round: Ch 4, FPdc around 1st dc, *ch 1, 1 FPdc around next dc, repeat from * around; join with sl st in 3rd ch of starting Ch 4
3rd round: sc around post of dc below, then ch 6, 1 FPtr around next dc, *ch 2, 1 FPtr around next dc, repeat from * to end of round; join with sl st in 4th ch of starting Ch 6.
4th thru 14th rounds: sc around post of tr below, then ch 7, 1 FPtr around next tr, *ch 3, 1 FPtr around next tr, repeat from * to end of round; join with sl st in 4th ch of starting Ch 7. Fasten off.
***NOTE: Now you will have a long U-shaped body. The tail will be attached to the starting Ch 5 place, and the head will eventually stick out of the upper part, which will be gathered with a ribbon around the neck. Also, this body will be stuffed with foam rubber in an oval shape (I did this), or you could use an oval piece of soap to stick in there.
LEGS (Make 4):
1st row: Fold body together lengthwise (in otherwords hold piece flat together). Have flat edge on top. Looking at right side of piece, count down 6 loops from top right side. Attach thread with sl st, ch 5, 1 tr in same space, *ch 1, 1 tr in same space, repeat from * once. (4 tr and 3 spaces)
2nd row: Ch 5, turn, 1 tr in first space, ch 1, 1 tr in next space, ch 1, 1 tr in next space, ch 1, 1 tr in 4th ch of turning ch.
3rd row: Ch 6, turn, 1 tr in first space, * ch 2, 1 tr in next space, repeat from * 2 times more (4 spaces), ch 2, 1 tr in 4th ch of turning ch. Fasten off.
NOW, count down, skipping next 4 loops and attach thread with sl st in next loop. (2nd leg on side). Work legs on other side of turtle body to correspond with first side. (What I do here is leave one more row on top of turtle so that his "shell" will be higher on top - in other words, do the first two legs, then count "across" the body, skipping 9 squares. On the bottom there will be 7 squares showing across.)
TAIL
1ST row: Join with sl st between two dc's in beginning Ch 5 ring of body. Ch 6, 1 tr between the next two dc's , ch 2, 1 tr between the next two dc's. (In other words, you will be making three tr's in ring, between the dc's already there, in order to join the tail to this spot. Find the center four dc's IIII and start between the two on the right-hand side. Make sense?)
2nd row: Ch 7, turn, 1 tr in first space, 1 tr in next space, ch 3, 1 tr in 4th ch of turning ch. Ch 9, turn, join with sl st to 4th ch of turning ch. (there will be a long loop across tip of tail (skipping over the two tr‚s). Fasten off.
HEAD
Ch 4, join with sl st to form a ring.
1st round: Ch 1, work 8 sc in ring. Join with sl st to 1st sc.
2nd round: Ch 1, 2 sc in each st of round. Join with sl st to 1st sc.
3rd thru 10th round: Ch 1, 1 sc in each st of round, Join with sl st to 1st sc.
Stuff with foam rubber.
Fold head together to close opening. Work 1 sc in each of 8 stitches (through both thicknesses), turn, and do not fasten off. Join with body of turtle:
NOW: open body of turtle and count down 3 rows inside from flat top edge (edge being the first row). Find the two center loops (we‚re still on the inside of the body). There are 8 stitches on the turtle head edge We're going to attach 4 stitches to one loop and 4 stitches to the other loop.
Work 1 sc in each of 4 sts of head and around one of the above loops simultaneously. Then again the other 4 sts of head and around the next loop. Ch 1, turn , skip 1st st, 1 sc in each of the next two sts. Join with sl st in last stitch.Fasten Off.
NOW - With Contrasting Color (I used white):
Join with sl st in corner of body top (flat top edge). Ch 1, work 4 sc in each space of top round, and down along sides (on same round as legs are attached), and up leg (Note: in outer corner of leg, make 5 sc, ch 4, 1 sc, 4 sc in next loop, sc, ch 4, sc in center loop, 4 sc in next loop, and 1 sc, ch 4, 5 sc in next outer corner of leg. Continue with 4 sc in each space around ˆ except for tail, which will be 12 sc in large end loop of tail. Continue around, Fasten off.
Use buttons or embroider eyes and mouth on head (optional - looks cute even without this).
STUFF BODY: I used a piece of foam rubber (about 1-1/2" to 2" thick), cut into an oval shape, for the stuffing. You may also stuff the body with an oval piece of soap.
NOW: Thread 1/4" thick ribbon through the second round of loops down from flat edge of body ˆthis will be around the head, which is now sticking out of the center of the gathering. Tie a bow on top of neck.
Posted: Sun Aug 21, 2005 4:43 pm
The "H/8" steel hook makes a rather "big loop", according to Debi...if anyone's seen one of these recently, are the loops supposed to be that generous?
PLEASE respond soon!
PLEASE respond soon!
Posted: Tue Aug 23, 2005 3:16 pm
I havent had a problem with it, but I'm sure you can use a "G" hook instead.
Posted: Tue Aug 30, 2005 12:28 pm
I'm just learning to crochet. Anyone have any basic beginner patterns?
Posted: Thu Sep 29, 2005 2:11 pm
Can you believe Grim crochets????? My daughter's babysitter taught me the very first patterns.... and I went crazy making blankets from there!! I have a blanket, started in 2003 (yep, two years ago) made with Caron's "Antique Christmas" tri-color.... and it just keeps getting bigger every year. I go to WAl-Mart around Christmas... buy up all of this seasonal yarn... and keep adding on until I run out til next year. Don't ask me why I'm doing this... it's just a "thang".. but the darn blanket is now about 8' x 10'!!! I figure someday I'll get another California King waterbed, and it will look nice there for Christmas. Anybody else have any freaky projects like that????
Posted: Thu Sep 29, 2005 2:41 pm
I wanna learn to crochet...... 
Maybe when I have some time on my hands I will pick up a book. Happy crocheting ladies!!!
Oh, and do you guys have any recommendations for good learning books? Thanks.
Maybe when I have some time on my hands I will pick up a book. Happy crocheting ladies!!!
Oh, and do you guys have any recommendations for good learning books? Thanks.
Posted: Thu Sep 29, 2005 7:55 pm
I don't have a book, but there's an excellent website that shows you how to do the stitches (with video):
http://www.stitchguide.com/
Enjoy!
http://www.stitchguide.com/
Enjoy!
Posted: Thu Sep 29, 2005 9:05 pm
Thanks anglewing I will check it out, hopefully not as hard as it looks. 
I have always wanted to learn and just havent done it yet. I wish I would have had a grandma or mom that knew how teach me, but it isnt in the family. I may just start a new tradition.
I will check it out, hopefully not as hard as it looks. I have always wanted to learn and just havent done it yet. I wish I would have had a grandma or mom that knew how teach me, but it isnt in the family. I may just start a new tradition.